木工機械專用脈沖陣打除塵器采用慣性分離與過濾除塵相結合的工作原理，能有效處理高濃度的混合粉塵氣流可有效分離5um以下的細微粉粒，是傳統旋風除塵器的理想替代產品。適用于各種木器廠家具廠木地板廠等的實木創花人造板顆粒,木質纖維的集塵除塵,木工除塵設備布袋除塵器是在汲取國內外同類產品先進技術經改進后設計而成的布袋除塵器。木工除塵器除塵設備采用高壓(0.5-0.7MPa)大流量脈沖閥逐條濾袋噴吹清灰的先進技術，正壓式風機布置，吸塵壓力大，設備阻力小與國內外其它布袋除塵器相比，具有清灰動能大，清灰效率高的特點。

　　The pulse array dust collector for woodworking machinery adopts the working principle of combining inertial separation and filtering dust removal, which can effectively handle high concentration mixed dust airflow and separate fine particles below 5um. It is an ideal substitute for traditional cyclone dust collectors. Suitable for various woodworking factories, furniture factories, wooden flooring factories, etc., solid wood flower artificial board particles, wood fiber dust collection and removal, woodworking dust removal equipment bag filter is a bag filter designed after absorbing advanced technology from similar products at home and abroad and being improved. The woodworking dust collector adopts advanced technology of high-pressure (0.5-0.7MPa) high flow pulse valve to spray and clean the dust filter bag one by one. The positive pressure fan is arranged, with high suction pressure and low equipment resistance. Compared with other bag dust collectors at home and abroad, it has the characteristics of high cleaning energy and high cleaning efficiency 

　　、木工機械專用除塵器應用范圍:適用于四面刨、砂光機、鋸切機、剖片機、棒磨機等各種木工機械設備，采用單機除塵或系統除塵的方法均可。單機除塵主要用于單臺木工機械除塵，具有靈活方便的特點。系統除塵用于木工機械生產線的除塵，具有經濟、實用、美觀等特點，既不影響生產操作，又可達到理想的除塵效果。布袋除塵器是目前使用除塵效率****的除塵器，除塵效果能達到99%。適用于實木刨花,人造板顆粒,纖維的集塵,氣箱脈沖袋式除塵器采用過濾的方法將含塵氣體中的粉塵顆粒阻留在布袋纖維織物上，從而使氣體得到凈化。適宜捕集非粘結性、非纖維粉塵，與一般除塵器相比，除塵效率可穩定在99%以上，能除去1微米左右的顆粒。該除塵器具有結構簡單，投資費用低，操作簡單可靠管理維護技術上要求不高等優點。

　　Application scope of specialized dust collectors for woodworking machinery: Suitable for various woodworking machinery equipment such as four sided planers, sanding machines, sawing machines, slicing machines, rod mills, etc., both single machine and system dust removal methods can be used. Single machine dust removal is mainly used for single woodworking machinery dust removal, with the characteristics of flexibility and convenience. System dust removal is used for dust removal in woodworking machinery production lines, which has the characteristics of economy, practicality, and aesthetics. It does not affect production operations and can achieve ideal dust removal effects. The bag filter is currently the most efficient dust collector in use, with a dust removal efficiency of up to 99%. Suitable for collecting dust from solid wood shavings, artificial board particles, and fibers. The pulse bag filter in the air box uses a filtering method to retain dust particles in the dusty gas on the cloth bag fiber fabric, thereby purifying the gas. Suitable for capturing non cohesive and non fiber dust, compared with general dust collectors, the dust removal efficiency can be stable at over 99%, and particles of about 1 micron can be removed. This dust collector has the advantages of simple structure, low investment cost, simple and reliable operation, and low technical requirements for management and maintenance.

　　、該種除塵設備具有阻力小，除塵效率高，處理風量大，性能穩定，占地面積小結構簡單，實用廉價等特點。含塵氣體由灰斗上部進風口進入后，在擋風板的作用下，氣流向****動，流速降低，部分大顆粒粉塵由于慣性力的作用被分離出來落入灰斗。含塵氣體進入中箱體經濾袋的過濾凈化，粉塵被阻留在濾袋的外表面，凈化后的氣體經濾袋口進入上箱體，由出風口排出。

　　This type of dust removal equipment has the characteristics of low resistance, high dust removal efficiency, large processing air volume, stable performance, small footprint, simple structure, practicality and low cost. After entering through the upper air inlet of the ash hopper, the dusty gas flows towards * * * * under the action of the wind deflector, and the flow velocity decreases. Some large particles of dust are separated and fall into the ash hopper due to the inertia force. The dusty gas enters the middle box and is filtered and purified by the filter bag. The dust is trapped on the outer surface of the filter bag, and the purified gas enters the upper box through the filter bag opening and is discharged through the air outlet.

　　木工中央除塵設備參數主要包括以下核心指標，結合權威性和時效性信息整理如下：

　　The parameters of the central dust removal equipment for woodworking mainly include the following core indicators, which are compiled based on authoritative and timely information as follows:

　　一、基本性能參數

　　1、 Basic Performance Parameter 

　　阻力損失

　　Resistance loss

　　進出口全壓差為1200Pa~5000Pa，數值越小能耗越低1。

　　The total pressure difference between import and export is 1200Pa~5000Pa, and the smaller the value, the lower the energy consumption.

　　出口含塵濃度 

　　Export dust concentration 

　　標準要求≤5mg/m?，滿足環保及用戶需求。

　　The standard requirement is ≤ 5mg/m ?, which meets environmental protection and user needs.

　　使用溫度 

　　Operating temperature 

　　最高可達280℃，需確保氣體溫度高于露點。

　　The maximum temperature can reach 280 ℃, and it is necessary to ensure that the gas temperature is 1 above the dew point.

　　風機功率 

　　Fan power 

　　通常為3KW~22KW，采用變頻器控制以優化效率。

　　Usually 3KW~22KW, using frequency converter control to optimize efficiency.

　　二、關鍵設計參數

　　2、 Key Design Parameter 

　　過濾速度 

　　Filtering speed 1

　　1.2~2.6m/min，平衡過濾效果與濾料壽命1。

　　1.2~2.6m/min， Balancing filtration efficiency and filter material lifespan.

　　過濾面積 

　　Filter area 

　　93~4361m?，根據處理風量和速度選擇。

　　93~4361m?， Select 1 based on the processing air volume and speed.

　　風速控制

　　Wind speed control

　　吸入口風速：28~30m/s（確保粉塵吸附） 

　　Inhalation inlet wind speed: 28~30m/s (ensuring dust adsorption) 

　　管道風速：≥30m/s（防止積灰），最低14m/s（保證吸力）。

　　Pipeline wind speed: ≥ 30m/s (to prevent dust accumulation), minimum 14m/s (to ensure suction) 

　　三、系統組成與技術特點

　　3、 System composition and technical characteristics

　　主機與風道 

　　Host and air duct 

　　主機采用4-72型離心風機，風道設計逐級收縮（如主風筒φ800mm，支風管φ200mm）。

　　The host adopts a 4-72 centrifugal fan, and the air duct design gradually shrinks (such as the main air duct with a diameter of 800mm and the branch air duct with a diameter of 200mm).

　　過濾技術

　　Filtering technology

　　初效分離：旋風除塵（處理大顆粒）

　　Initial separation: Cyclone dust removal (for processing large particles)

　　深度過濾：布袋脈沖除塵（處理微細顆粒，除塵效率≥99%）。

　　Deep filtration: Bag pulse dust removal (processing fine particles, dust removal efficiency ≥ 99%).

　　智能化控制

　　Intelligent control

　　配備變頻器、電控箱及火情監測系統，實現自動調節與安全防護。

　　Equipped with frequency converters, electrical control boxes, and fire monitoring systems to achieve automatic adjustment and safety protection.

　　四、其他參數

　　4、 Other parameters

　　處理風量 ：總風量可達110000m?/h（如110KW全負荷運行）。

　　Processing air volume: The total air volume can reach 110000m ?/h (such as 110KW full load operation).

　　維護便捷性 ：管道底部設置透明檢修口，方便清潔。

　　Convenience of maintenance: Transparent inspection ports are installed at the bottom of the pipeline for easy cleaning.

　　以上參數綜合了設備性能、設計要點及技術優勢，適用于木工、家具加工等粉塵治理場景。

　　The above parameters integrate equipment performance, design points, and technical advantages, and are suitable for dust control scenarios such as woodworking and furniture processing.

　　本文由 中央除塵設備  友情奉獻.更多有關的知識請點擊  http://www.dadmomgo.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the Central Dust Removal Equipment For more related knowledge, please click http://www.dadmomgo.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.